Tcd-av1 manual

Menu Menu. Home Resources Resources. Traffic control devices manual The planned structure of the Traffic control devices manual comprises 15 documents three specifications, 10 parts, a glossary and a list of references and is shown in the table below. The Traffic control devices manual will be published electronically only.

Part Title Status Latest version Sign specifications Detailed descriptions of traffic signs, including dimensions, colour and layout Published Traffic signal specifications Planned Marking specifications Under consideration 1 General requirements for signs Published [PDF, 1. Sign specifications Detailed descriptions of traffic signs, including dimensions, colour and layout. Rear speakers: Behind your listening position, facing slightly inward.

Nearly six feet approx. Center speaker: Precisely between the front speakers. Subwoofer: The position of the subwoofer is not so critical because low bass tones are not highly directional. To obtain more stability and usefulness, we recommend that you mount those speakers on the provided mounting brackets type A. To mount speakers on the mounting brackets type A 2 Screw type A 1 Attach the bracket to bottom of the speaker by using the provided screw type A.

Note Though this speaker is a magnetically shielded type, there may be some influence on a TV picture depending on the type of TV or the placement of the speaker.

In such a case, place the speaker apart from the TV so that there is no influence on TV picture. Do not mount them on thin plywood or soft wall surface material, as the screws may come out of the flimsy surface, causing the speakers to fall down and be damaged, or result in personal injury. Longterm use and vibrations may cause them to fall down. Screw type A Note The mounting bracket type C is provided for each of 5 speakers. This system needs 6 kinds of connections: system connection, speaker connection, antenna connection and external unit connection, however the order of them is not important.

Never plug the AC supply lead of this system into the AC outlet until all connections are completed. Damaging the cable will lead this system to a breakdown. If the connections are faulty, no sound will be heard from the speakers. If these wires are reversed, the sound will be unnatural and lack bass. All of the speakers NX-AV1 are identical. Normally, use the short cords to connect with the front and center speakers, and use the long ones to connect with the rear speakers.

It will result in noise generation, since the unit is equipped with digital electronics. Consult your dealer. Make connections between this system and other components using RCA pin plug connector cables correctly, that is to say L left to L and R right to R. Before setting this switch, disconnect the AC supply lead of this unit from the AC outlet. Note: In this position, the On Screen Display function of this system will not work unless a video signal is input to this system.

AUTO: Outputs signals in the same format as the video signal input to this system employs. Set this switch to the position for the format your monitor TV employs.

Note Make sure to input a video signal which employs the same format that your monitor TV employs, otherwise a picture will not be played back normally. Press it again to switch this system into the standby mode. When a button is pressed, the name of selected source appears on the display. If this system is in the standby mode, pressing one of these buttons turns this system on and selects the corresponding input source.

When the CD playback is finished, unload the disc from this tray. Refer to page 21 for details. If this system is in the standby mode, pressing this button turns this system on, then selects the CD player, and then opens the disc tray. When this button is pressed and held for about 2 seconds, the automatic preset tuning begins.

Refer to page 37 for details. When an input source other than the built-in CD player is selected, pressing this button selects the CD player as an input source and starts playback if a disc is loaded on the disc tray. Pressing the lower side again resumes the playback.

While playing back a disc, pressing the upper side stops the play. When the tuner is in the automatic or manual tuning mode, this button is used for tuning search. Pressing the upper side makes a tuning search to higher frequencies, and pressing the lower side makes a tuning search to lower frequencies. When the tuner is in the preset tuning mode, this button is used for selecting a preset station number. Pressing the upper side selects a higher preset station number and pressing the lower side selects a lower preset station number.

See page 25 for details. See pages 49 to 50 for details. You can listen to the sound to be output from the front speakers through headphones. See pages 25 and 49 to 50 for details. F VIDEO 2 input terminals Connect an auxiliary video or audio input source unit such as a camcorder to these terminals.

The source connected to these terminals can be selected by the corresponding input selector button. When the CD player is selected, pressing this button turns the CD player into the single repeat play mode. Open and close the control door When it is not necessary to operate controls inside the control door, close the door.

In this state, sound output is 2-channel stereo. During this period, the displayed station can be programmed to the memory by selecting a desired preset station number and then pressing the MEMORY button again. Lights up when an FM stereo broadcast with sufficient signal strength is received. Displays various information, for example station frequency, playing time of compact disc and name of selected input source.

Controls tuner. If the tuner is not selected as the input source, pressing one of these buttons selects the tuner, and then selects a preset station number. If this system is in the standby mode, pressing one of these buttons turns this system on, and then operates in the same way.

If the CD player is not selected as the input source, pressing this button selects the CD player with the CD player stopped. If this system is in the standby mode, pressing this button turns this system on, and then operates in the same way. For details, refer to pages 26 to Pressing this button again pauses the playback, and pressing it once more resumes the playback.

If the CD player is not selected as the input source, pressing this button selects the CD player and starts playing back a disc. See page 51 for details. The name of selected input source is shown on the display. In the standby mode, the display shows only the time. Direct input source selection When this system is in the standby mode, pressing an input selector button will turn the power on and select the corresponding input source.

In this mode, the display shows only the time. In this mode, main voltage is still present inside the system. If you want to switch off the system completely, disconnect the AC power plug from the AC outlet. If this system is in the standby mode, you can proceed to the next step.

Press and hold to advance continuously. The time display will go out, however, the clock will function for about 5 minutes without power supply. So you do not have to reset the time if the AC power supply is resumed within about 5 minutes. When the AC power supply is resumed after more than 5 minutes pass without power supply, the time display will flash on and off to indicate that the time must be reset.

When this adjustment is performed, the sound output level heard at the listening position will be the same from each speaker. This is important for the best performance of the built-in Dolby Pro Logic surround decoder.

The adjustment of each speaker output level should be done at your listening position with the remote control transmitter. Otherwise, the result may not be satisfactory. The display changes as shown below. To listen to a radio program on the built-in tuner, see pages 33 to See pages 47 to 48 for details. Recommended impedance is 32 ohms. In this case, listen at lower volume. Press once for each track to be advanced or reversed.

However, it will not move forward during playback of the final track. This is convenient for reviewing the contents quickly. An entire disc is played back repeatedly. However, if signals of the station you want to select are weak, you must tune to it manually Manual tuning. ST Stereo indicator will light up when an FM stereo broadcast with sufficient signal strength is received.

Release it just before reaching the desired frequency, and then press it repeatedly until the desired frequency appears. With this function, you can select any desired station by only calling the corresponding preset station number. Up to 40 stations 8 stations x 5 groups can be stored.

If, however, the power is cut for more than one week, the memory may be erased. If so, it can be reprogrammed by simply following the Preset tuning steps. By this function, this tuner performs automatic tuning and stores stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the manual preset tuning method on page Received stations are programmed to the preset station number A1, A2, A A8, B If the number of received stations is less than 40, the search will stop after searching all frequencies.

FM stations that employ no RDS network service cannot be programmed. However, you can change the setting so that the unit can program not only RDS stations but also other FM stations. Refer to page 43 for details. Displays information about the program such as title of the song, name of the singer, etc. There are 15 program types to classify RDS stations as shown on the next page. This signal comes from the RDS station now being received.

Time of the built-in clock can be automatically corrected on the basis of this signal. AFFAIRS Current affairs: Topical program expanding or enlarging upon the news, generally in different presentation style or concept, including documentary debate, or analysis INFO SPORT Information: Program whose purpose is to impart advice in the widest sense, including meteorological reports and forecasts, consumer affairs, medical help, etc. Sport: Program concerned with any aspect of sport.

CULTURE Culture: Programs concerned with any aspect of national or regional culture, including religious affairs, philosophy, social science, language, theatre, etc. Examples are: quizzes, panel games, personality interviews, comedy and satire. POP M Pop: Commercial music, which would generally be considered to be of current popular appeal, often featuring in current or recent record sales charts.

Examples of music in this category are instrumental music, and vocal or choral works. The RDS mode not employed by the station cannot be selected. This is because the unit has not received all of the RDS data on the station yet. In this mode, you can make this unit search for a station which is broadcasting a program of your desired program type.

For details, refer to page Though the reception mode is changed to monaural by this operation, when you change the display to an RDS mode, RDS data may be displayed. Information about the program on the station being received is displayed. Information is displayed by a maximum of 64 Roman Alphabets including umlaut sign. The CT data from the station being received changes every minute.

Hour Minute This unit corrects time of the built-in clock by synchronizing it with the CT data. This function can also be canceled, if so desired. If the station has PS data, after that, it turns into the PS mode. The preset station number changes rapidly in sequence. The tuner begins searching for another station which broadcasts a program of the same program type. See page 37 for the operating procedure.

This tuner has the following functions which make use of RDS data service. These are originally in operation [ON]. However, you can cancel these functions [OFF], if so desired. The processor allows you to electronically expand and change the shape of the audio sound field from both audio and video sources, creating a theater-like experience in your listening room. You can create an excellent audio sound field by selecting a suitable sound field program this will, of course, depend on what you will be listening to , and adding desired adjustments.

The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. The data for these sound fields was recorded at actual locations using sophisticated sound field measurement equipment. In addition, this unit incorporates a Dolby Pro Logic Surround decoder for multi-channel sound reproduction of sources encoded with Dolby Surround. Note The channel level balance between the left and right rear effect speakers may vary depending on the sound field you are listening to.

This is due to the fact that most of these sound field recreations are actual acoustic environments. The application of a sophisticated digital signal processing system reduces crosstalk and directs or steers the sound source more smoothly and precisely, as compared to conventional types. This effect creates a wide surround sound field, and expands the sound stage with an improved presence image.

This program is used for musical based movies, as well as drama and comedy based movies. This program gives you long delays between direct sounds and effect sounds, and extraordinarily spacious feel of a large stadium. This program recreates the acoustic environment of a lively disco in the heart of a very lively city.

You will experience a very dynamic or lively sound field. Compared to a strictly mono setting, the sound image created in this mode is wider and slightly forward of the speaker pair, lending an immediacy to the overall sound. It is particularly effective when used with old mono movies, news broadcasts and dialog.

For opera, the orchestra and stage are ideally recreated, letting you feel as if you were in an actual concert hall. For source playback, refer to the sections beginning from page For details, refer to the corresponding descriptions on pages 47 to Once you select a program, it is linked with the input source selected at that time.

So, when you select the input source next time, the same program is automatically called. The sound will be the normal 2channel stereo without surround sound effect. Sound is heard only from the center speaker. The larger the value, the later the effect sound is generated. This adjustment can be made to all programs individually. The value stops changing momentarily at the preset point. Note The values of the delay time, center level and rear level you set the last time will remain memorized even when this system is in the standby mode.

However, if the power cord is kept disconnected for more than one week, these values will be automatically changed back to the original factory settings. On each mode, make a setting for the timer play, following the setting procedure described below. Even if you do not set the time, it has already been set so that the timer play finishes after 1 hour. However, it also turns this system into the standby mode. MIN 3 Note If a timer play setting is made and this system is not turned into the standby mode, the source set for the timer play will begin playing when the time comes in place of the source played at that time.

If it is not canceled, the system will be turned on at the same time every day, so it can be used as an alarm. However, if you are planning to go out at that time, cancel the timer play setting. For the minute: Use the MIN button and operate it in the same way as you did to change the hour. See page 49 and When the sleep timer operation finishes, the timer begins functioning to turn the source on at the preset time.

Note Do not make the timer time setting so that the timer will start during sleep timer operation. Since sleep timer operation has priority, the timer will not operate. AC supply lead is not plugged in. Plug in the AC supply lead. It happens that this system does not work normally. There is an influence of strong external noise lightning, excessive static electricity, etc. Turn this system into the standby mode and disconnect the AC power cord from the AC outlet.

After about 30 seconds have passed, connect the power and operate this system again. No sound from one speaker Loose speaker connections. Connect properly. No sound from speakers. Internal protection circuit is functioning. Unplug the AC supply lead from the wall AC outlet, and then plug in again. No sound from the rear speakers. One rear speaker connection is loose or bad. Connect it properly. The sound output level to the rear speakers is set to minimum. No DSP program is selected. Select the appropriate program.

The sound output level to the center speaker is set to minimum. Incorrect DSP program selection. No sound or no picture from an external unit connected with this system. Incorrect cord connections. If the problem persists, the cords may be defective. Input source selection is not proper. Make a proper input source selection. Current time is not set. Set current time. This unit will not operate properly.

The internal microcomputer has been frozen by an external electric shock lightning, excessive static electricity, etc. Unplug the AC supply lead from the wall AC outlet, and then plug in again after about one minute. Excessive static in FM broadcasts. Interference from starting motor of nearby car. Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.

The colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug. Making sure that neither core is connected to the earth terminal of the three pin plug.

This system is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this system itself is turned off. In this state, this system is designed to consume a very small quantity of power. To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. As the laser beam used in this unit is harmful to the eyes, do not attempt to disassemble the cabinet. Laser component in this product is capable of emitting radiation exceeding the limit for Class 1.

Slide the cover in the direction of the arrow. In this case, reposition the main unit to avoid direct lighting. This system is a multi-channel audio system which consists of the units shown below. By driving 6 speakers, the built-in digital sound field processor DSP creates various kinds of Yamaha original digital sound fields simulating an actual concert hall, live house, etc.

When watching a movie source, the built-in Dolby Pro Logic Surround decoder and the digital sound field processor turns your room into a movie theater with tremendous impact. Ultralow bass reproduced by the subwoofer SW-AV1 makes sound more real and more powerful. The built-in CD player and tuner provide you with effortless operation and high performance. You will be given great enjoyment in listening to music and watching TV with this system. Follow the instructions in this manual carefully when setting up your system, and this unit will sonically transform your room into a wide range of listening environments —movie theater, concert hall, and so on.

Please read this operation manual carefully and store it in a safe place for later reference. What is it that makes live music so good? Furthermore, our technicians, armed with sophisticated measuring equipment, have even made it possible to capture the acoustics of a variety of venues such as an actual concert hall, theater, etc. This unit employs a Dolby Pro Logic Surround decoder similar to professional Dolby Stereo decoders used in many movie theaters.

By using the Dolby Pro Logic Surround decoder, you can experience the dramatic realism and impact of Dolby Surround movie theater sound in your own home. Dolby Pro Logic employs a four channel five speaker system. The Pro Logic Surround system divides the input signal into four levels: the left and right main channels, the center channel used for dialog , and the rear surround sound channels used for sound effects, background noise, and other ambient noises.

The center channel allows listeners seated in even less-than-ideal positions to hear the dialog originating from the action on the screen while experiencing good stereo imaging. When you play a source encoded with Dolby. Surround on this unit, the Dolby Pro Logic Surround decoder decodes the signal and distributes the surround-sound effects.

This system improves the stability of sound at each channel and minimizes crosstalk between channels, so that positioning of sounds around the room is more accurate compared with conventional analog signal processing systems. In addition, this unit features a built-in automatic input balance control. This always assures you the best performance without manual adjustment.

Manufactured under license from Dolby Laboratories Licensing Corporation. Dolby Surround sound system shows its full ability in a large movie theater, because movie sounds are originally designed to be reproduced in a large movie theater using many speakers. It is difficult to create a sound environment similar to that of a movie theater in your listening room, because the room size, materials of inside walls, the number of speakers, etc.

Yamaha DSP technology made it possible to present you with nearly the same sound experience as that of a large movie theater in your listening room by compensating for lack of presence and dynamics in your. Page 8: Outline Of This System This system is a multi-channel audio system which consists of the units shown below. By driving 6 speakers, the built-in digital sound field processor DSP creates various kinds of Yamaha original digital sound fields simulating an actual concert hall, live house, etc.

When watching a movie source, the built-in Dolby Pro Logic Surround decoder and the digital sound field processor turns your room into a movie theater with tremendous impact. Follow the instructions in this manual carefully when setting up your system, and this unit will sonically transform your room into a wide range of listening environments —movie theater, concert hall, and so on. Above all, the positioning of speakers are important, because it controls the whole sound quality of this system.

Position the speakers on the basis of your listening position by following instructions on this section. To obtain more stability and usefulness, we recommend Mounting that you mount those speakers on the provided Page Connections Never plug the AC supply lead of this system into the AC outlet until all connections are completed.

Page Connections 15 m 49 feet 7. Press it again to switch this system into the standby mode. Disc tray When you will play back a compact disc, load the disc on this tray. If the tuner is not selected as the input source, pressing one of these buttons selects the tuner, and then selects a preset station number.